Article: SPD9AC (U=220VAC)
SPD9DC (U=7-60VDC)
DMX splitter - 1 input 9 outputs on DIN rail VJLight SPD-9i with dual galvanic isolation, power indicators and presence of incoming DMX signal. This splitter is designed to amplify the DMX signal and branch one incoming signal line into nine lines. This is a great installation solution for clubs, restaurants, private homes, apartments and even renters. VJLight SPD-9i has one three-contact DMX input and eight three-contact outputs with galvanic isolation of power and galvanic isolation of the DMX signal of each output. It is made in a impact-resistant plastic case and is designed for installation directly in the electrical panel on the DIN rail. The DMX splitter is connected directly to the AC power grid 220V (85 ~ 264VAC 120-370VDC), but it is possible to supply it with a DC power supply 7-60 VDC. Each DMX input and output is powered from its own power source (galvanically isolated from other PS), DMX channels retransmit the signal through galvanic isolation, which in case of failure of lighting devices or DMX line malfunction will provide protection for devices connected to other signal control lines. As a galvanic isolation, optocouplers are no longer used, but a more advanced, high-speed (up to 1024 DMX channels at the output) and reliable method is used, which is devoid of such drawbacks of LEDs as their degradation during operation. VJLight SPD-9i has built-in protection against overvoltage, short circuit, etc. For ease of installation, the connection is made through removable terminals 15EDGKB-3.5-03P-14-00A(H) (included). After connecting the terminals to the contacts, the compartments are closed with lids, clamping the wires (it is possible to trim the lamellas of the lid to the required length) and closing access.
Free delivery in Moscow. We will send to the regions.
It is possible to supply equipment with your logo.
